Customers compare C99NR to these similar products
Products Featured in this Video
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Curt adjustable two-ball mount for a two-inch hitch. Has a 15,000 pound gross towing weight capacity. Now this ball mount has the dual ball platform that'll let you hook up your trailer to your tow vehicle. Basically the shank is what'll slide into your two-inch hitch receiver opening and then the balls up… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The Curt Adjustable 2-Ball Mount #C99NR uses Pins #C56NR which are 3/4" in diameter and have a usable length of 3-3/4". You will need the InfiniteRule Lock #IR36FR which is also 3/4" in diameter with a 3-7/8" span to lock the…
view full answer...I recommend using the Curt Lock Set #C23556 for your Curt Adjustable 2-Ball Mount #C99NR. This comes with a lock for the hitch receiver and one for the ball mount platform. Even though your platform uses 2 pins, only 1 locking pin is needed to secure…
view full answer...I am not sure what products you are referring to but the most safe, secure, and easy tie down method we offer for your Can-Am Spyder is a combination of the Erickson Horizontal E-Track part #EM19147 (3), the Erickson E-Chock Wheel Chocks part…
view full answer...I do have an option for you but there aren't any custom fit trailer hitch options for a 2006 Thomas School Bus. That said, we do still have universal options which can be installed either via welding or cutting/drilling. For this, I recommend the…
view full answer...The Curt adjustable ball mount part #C99NR that you referenced weighs 36 lbs.
view full answer...Are you sure about the 165/80-13 tire size? I don't show that as a currently available tire size, could you have meant a 185/80-13? In any event, a 175/80-13 tire measures 24 inches tall x 6.9 inches wide which would be slightly shorter at about…
view full answer...The average trailer coupler height is in the neighborhood of 16-19 inches. What I'd recommend you do is put the various trailers you tow up on their jack so the frame is level to the ground, and measure their coupler height (see linked article).…
view full answer...I think the part #STL68RB would be perfect for your flatbed truck (looks good by the way). The dimensions of the this oval light are 10 inches long and 3 inches tall. They do stop/turn/tail/reverse light functions as well so you would be totally set.…
view full answer...The distance between the mounting holes on the Pollak 7- and 4-Pole Trailer Connector Socket with Mounting Bracket, #HM40975, measures 2 inches to 2-3/4 inches. I have attached a picture to illustrate these measurements. Two, 5/16 inch self tapping…
view full answer...Typically the Brake Controller Output pin will be the 1 o'clock pin for a trailer side 6-Way connector (see attached picture). This isn't always the case though so you will want to double check before assuming that is the case for using the…
view full answer...I went to the warehouse and measured the cam and the lock for you part #CAM44333. The diameter of the threaded portion of the lock is 3/4". The length of the cam is 2" the portion of the cam that sticks out from the lock is 1" and the…
view full answer...For the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" #C12172, there really isn't a solution other than to use a torque wrench. Without torqing the necessary bolts to the manufacturer specs, you void the warranty and can have…
view full answer...